Exhaust Vent Adapter Plate – Back Wall – US and Canada

$31.00

The DRY-CON X ® Exhaust Vent Adapter Plate- Back Wall- is necessary when mounting the vent on the back wall of a corrugated container. The screen profile fits snugly against the exterior.

  • Made of sturdy stamped aluminum construction

WHEN DO I NEED AN EXHAUST VENT ADAPTER PLATE?

  • The adapter plates are ONLY necessary when mounting the DRY-CON X ® Exhaust Vent on the side or rear of a Shipping Container. It converts the corrugation to a flat surface to allow for the installation.
  • The Back Wall and Side Wall adapter plates are different. Be certain you are ordering the correct plate.
  • INTAKE VENTS require NO Additional Adapter Plate of any kind and are designed for a snug fit.
SKU: Exhaust Vent Adapter Plate - Back Wall Categories: , ,

The DRY-CON X ® Exhaust Vent Adapter Plate- Back Wall- is necessary when mounting the vent on the back wall of a corrugated container. The screen profile fits snugly against the exterior.

WHEN DO I NEED AN ADAPTER PLATE?

  • The adapter plates are ONLY Required if mounting EXHAUST VENTS on a Back or Side Wall.
  • The Back Wall and Side Wall adapter plates are different. Be certain you are ordering the correct plate.
  • INTAKE VENTS require NO Additional Adapter Plate of any kind and are designed for a snug fit.

For questions call or email:

Bob Cravens
Phone: (503) 559-8094 (PST)
[email protected]

Greg Cravens
Phone: (812) 798-0787 (CST)
[email protected]

Price: $31.00