Kit #4: 2 Exhaust, 2 Side Wall Intake, 2 Back Wall Adapter

$396.00

This Kit is designed for 40′ Shipping Containers that fit at least one of the following scenarios:

  • Scenario B: DOORS FACING NORTH and WIND PRIMARILY COMING FROM any combination of SOUTH/EAST/WEST
  • Scenario D: DOORS FACE SOUTH and WIND COMING PRIMARILY FROM any combination of NORTH/EAST/WEST
  • Scenario F: DOORS FACE EAST and WIND COMING PRIMARILY FROM any combination of NORTH/SOUTH/WEST
  • Scenario H: DOORS FACE WEST and WIND COMING PRIMARILY FROM THE EAST

If your container does not fit any of these scenarios, please see our Vent Placement Guide.
 

Choose One:

The DRY-CON X® Exhaust Vent

For Shipping Containers & Storage, this vent “DRIVES” the Ventilation System. Our patented design creates a “Venturi Effect” when air passes over or through the vent . The vacuum this creates pulls stale, moist air out of the enclosure and then fresh, ambient air is pulled through the Intake Vent completing the air exchanges necessary to prevent moisture buildup.

OUR EXHAUST VENT:

  • Operates as an exhaust port in any wind condition regardless if the enclosure is stationary or mobile
  • Requires no moving parts and is maintenance free
  • Is screened for debris and pest control
  • Is made from highly durable UV resistant Polycarbonate
  • Installs directly onto container doors without an Adapter Plate
  • Must have an Intake Vent(s) to allow it to perform to specifications; 1 Intake Vent /1 DRY-CON X ® Exhaust Vent for a 20' Container, 2 Intakes /2 DRY-CON X ® Exhaust Vents for a 40' Container

Side Wall Intake Vent

This is a passive vent designed to be easily installed on a side wall of a container / conex for condensation and moisture control. The size (vent area) is designed to feed one DRY-CON X ® Exhaust Vent.

OUR INTAKE VENT:

  • Is part of the DRY- CON X® AIR EXCHANGE SYSTEM that allows fresh air to enter the container and be drawn through by the Exhaust vent (“Driver”)
  • Requires no moving parts and is maintenance free
  • Is screened for debris and pest control
  • Is made of highly durable UV resistant Polycarbonate

Back Wall Adapter Plate

The DRY-CON X ® Exhaust Vent Adapter Plate- Back Wall- is necessary when mounting the vent on the back wall of a corrugated container. The screen profile fits snugly against the exterior.

  • Made of sturdy stamped aluminum construction

WHEN DO I NEED AN EXHAUST VENT ADAPTER PLATE?

  • The adapter plates are ONLY necessary when mounting the DRY-CON X ® Exhaust Vent on the side or rear of a Shipping Container. It converts the corrugation to a flat surface to allow for the installation.
  • The Back Wall and Side Wall adapter plates are different. Be certain you are ordering the correct plate.
  • INTAKE VENTS require NO Additional Adapter Plate of any kind and are designed for a snug fit.

For questions call or email:

Bob Cravens
Phone: (503) 559-8094 (EST)
Rv3604u@aol.co

Greg Cravens
Phone: (812) 798-0787 (CST)
Gregory.cravens@sbcglobal.net

Price: $396.00